 |
| |||||
|
| |||||||||||||||||
Top performance 1.4" high frequency compression driver. The particular mylar/titanium diaphragm using a 3" edgewound flat aluminium wire voice coil and a FEA computer optimized lightweight Neodymium magnet assembly using a copper shorting ring produce smooth response, very high efficiency and outstanding sonic properties. This unit weights only 2.6 kg.
Specifications1
- Throat Diameter 36 mm (1.4 in)
- Nominal Impedance 8 Ω
- Minimum Impedance 8.3 Ω
- Power Handling (1200 –20000 Hz)
- Nominal2 80 W
- Continuous Program3 160 W
- Sensitivity (1W/1m)4 109.5 dB
- Frequency Range 0.5 – 18 kHz
- Recommended Crossover5 1200 Hz
- Voice Coil Diameter 75 mm (3 in)
- Winding Material Aluminium
- Inductance 0.14 mH
- Diaphragm Material Titanium
- Flux Density 2.05 T
Mounting and Shipping Information
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter 132 mm (5.2 in)
- Depth 65 mm (2.6 in)
- Net Weight 2.6 kg (5.7 lb)
1 Driver mounted on B&C ME 90 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.
| Other B & C products similar to B&C DE900 80W 8 Ohm 1.4" Bolt On Compression Driver: |
|
||
 |
B&C Diaphragm for DE60 DE900 DE910 and DE950 8 Ohm £78.50 inc VAT | ||
|
|
B&C DE900 80W 8 Ohm 1.4" Bolt On Compression Driver PDF data sheet (750 kb)HK Audio CDR208S 9940154 | Tweeter | Original
HK Audio CDR208T 9940154 | Tweeter | Original
Our database of parts includes a wide range of products, and in many cases offers cost effective alternatives for repair. Alternatives are loosely grouped into three types:
Original - Usually an exact match to the original product, and just the 'standard' part from the factory which gets rebadged by manufacturer with their own brand and part number. Occasionally, there are subtle tweaks made from the standard part, but its virtually impossible for us to determine this. If we have listed the part as Original, it means we are confident the performance is the same.Aftermarket - Aftermarket parts often become available from factories in the far east once the original part is no longer manufactured. They are intended to be a close match, and provide a cost-effective alternative.
Equivalent - These are alternative options, which provide very similar performance, but are not the same as the original. In some cases the performance may actually be improved. We have used both our own experience, and feedback from customers in generating list of alternatives. Alternatives like this are useful when the original part is no longer made, there is no aftermarket option, so the only choice is to upgrade with the nearest current equivalent product.