Convair 2-way Crossover 2.5KHz
Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion points are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.
SPECIFICATION
-
Type: Two Way Crossover
-
Frequency: 2.5KHz
-
Slope: 12dB/octave Butterworth
-
Impedance: 8 ohms
-
RMS Power: 400W
-
Program Power: 800W
-
Dimensions: 118 x 105 x 46mm high
-
Insertion loss better than 0.4dB, Crossover point within +/-10% of stated value. (typical tolerance is less than 5%)
Convair 2 way crossovers include space to add attenuation resistors to the high pass side of the filter to better match the output of the high frequency driver to that of the low frequency driver. For more details click the link below:
Crossover Attenuation Guidance
We are able to build to order most common values between 0.1mH and 7mH, subject to limitations of bobbin size and wire diameter. Please email the sales office.
SPECIFICATION
Type: Two Way Crossover
Frequency: 2.5KHz
Slope: 12dB/octave Butterworth
Impedance: 8 ohms
RMS Power: 250W
Program Power: 500W
Dimensions: 118 x 105 x 46mm high
Insertion loss better than 0.4dB, Crossover point within +/-10% of stated value. (typical tolerance is less than 5%)
| Other Convair Electronics products similar to Convair 2-way Crossover 2.5KHz : |
|
