 |
| |||||
|
This is a new product, which is not yet available. Preliminary information for reference only. Specifications may change. | ||
Lavoce DN14.300TK - 1.4" 110W 8 Ohm Compression Driver
Key features
- 3 INCH EDGEWOUND CCA VOICE COIL
- 109 dB/SPL SENSITIVITY
- 220 W PROGRAM POWER HANDLING
- FEM OPTIMIZED MOTOR, PHASEPLUG AND DIAPHRAGM
- 500 - 20000 Hz FREQUENCY RANGE
- TITANIUM DIAPHRAGM AND POLYIMIDE SURROUND
- NEXT GENERATION HF DESIGN
- PATENTED IIS INTEGRAL INPUT SURFACE PHASEPLUG
Technical specifications
- Throat Diameter: 36 mm (1.4 in)
- Impedance: 8 Ohm
- Minimum Impedance: 8 Ohm
- AES Power: 110 W
- Program Power: 220 W
- Sensitivity: 109 dB
- Frequency Range: 500 - 20000 Hz
- Voice Coil Material: Edgewound CCA
- Voice Coil Former: Kapton
- Voice Coil Inductance: 0.09 mH
- Diaphragm Material: Titanium
- Surround Material: Polyimide
- Magnet Material: Neodymium
- Magnet Diameter: 130 mm (5.1 in)
- Flux Density: 2.1 T
- Driver Displacement Volume: 0.5 l (0.018 ft3)
- Recommended Crossover: 1.2 kHz
Shipping Information
- Multipack weight: 19.6 kg (43.2lb)
- Multipack size W x D x H: 505 x 465 x 98 mm (19.9 x 18.3 x 3.9in)
- Net weight: 2 kg (4.4lb)
- Multipack Quantity: 9
NOTES
1 - Program power is defined as 3 dB greater than AES Power
2 - AES Power: Horn loaded test for 2h with continuous, band-limited (2500-20000 Hz, 12dB/oct.) pink noise as per AES 2-1984 Rev. 2003.
3 - Sensitivity: Measured on axis at 2.83V, 1m, driver loaded with 60° x 40° horn, SPL averaged in the frequency range 2000 - 18000 Hz.
4 - Recommended Crossover: High pass filter with slope 12dB/oct. or higher.
| Other Lavoce products similar to Lavoce DN14.300TK - 1.4" 110W 8 Ohm Compression Driver: |
|
||
|
|
Lavoce DN14.300TK - 1.4" 110W 8 Ohm Compression Driver PDF data sheet (502 kb)
View Lavoce website for more information for Lavoce DN14.300TK