 |
| |||||
|
| |||||||||||||||||
The LF18N451 is a very high power handling and efficiency transducer specially designed to provide powerful and accurate sub-bass frequencies with low distortion and low power compression.
Ultra fast time response. The LF18N451 uses a fibre loaded cone assembly along a large triple roll surround, this combination provides remarkable strength and control.
Double silicon spider sysetm ensures excellent control during large excursions.
A fully optimazed T-pole design generate the minimum amount of flux modulation.
The Dual-forced air venting system provides a very efficient voice coil ventilation to minimize the power compression
Applications:
The LF18N451 is ideal in applications where light weight,very high BL and power handling are required.
Its especially used for touring, perfect for powerful lows in horn loaded sub bass system or reflex designs.
Main Features:
- 4,5 - inch Inside/Outside copper voice coil
- 3000 Watt continuous program power handling
- 97.5 dB Sensitivity
- 30 Hz - 1 kHz Frequency range
- Dual-forced air ventilation for minimum power compression
- Dual spider designed with silicon based damping control
- BL of 30.2 Txm to provide a faster and accurate low frequency
General Specifications
- Nominal Diameter: 460 mm/ 18 inch
- Rated Impedance: 8 O
- Program Power: 3000 W AES
- Power handling capacity: 1500 W AES
- Sensitivity: 97.5 dB
- Frequency Range: 30 Hz - 1000 Hz
- Effective Piston Diameter: 395mm / 15.6 inch
- Max Excursion Before Damage (peak to peak): 60 mm/2.36 inch
- Minimum Impedance: 6.3 O
- Voice Coil Diameter: 115 mm / 4.5 inch
- Voice Coil Material: Copper
- Voice Coil Winding Depth: 26 mm / 1.02 inch
- Number of layers: 2
- Kind of layer: inside / outside
- Top Plate Thickness: 15 mm / 0.6 inch
- Cone Material: No pressed pulp
- Cone Design: Curved
- Surround Material: Polycotton
- Surround Design: Triple roll
- Magnets: Neodymium
Thiele/Small Parameters
- Resonance: 31 Hz
- DC resistance: 5.0 Ohms
- Mechanical factor: 6.0
- Electrical factor: 0.25
- Total factor: 0.24
- BL Factor: 30.2 T � m
- Effective Moving Mass: 235 g
- Equivalent Cas air load: 245 litres
- Effective piston area: 0.122 m�
- Max. linear excursion (mathematical): 8.8 mm
- Voice - coil inductance @ 1kHz: 2.6 mH
- Half-space efficiency: 2.54%
Mounting information
- Overall Diameter: 465mm / 18.3 inch
- Bolt Circle Diameter: 442-447mm / 17.4-17.6 inch
- Bolt Hole Diameter: 6.5mm / 0.25 inch
- Front Mount Baffle Cut-out: 424/16.7 inch
- Rear Mount Baffle Cut-out: 424mm / 16.7 inch
- Depth: 205mm / 8.1 inch
- Volume occupied by the driver: 5.5 litres / 0.19 /ft�
- Net Weight: 10.6 kg / 23.3 lbs
Shipping information
- Shipping weight: 11.8 kg / 26 lbs
| Other RCF products similar to RCF LF18N451 - 18" 1500W 8 Ohm: |
|
||
|
|
View RCF website for more information for RCF LF18N451